Browse Month

March 2012

Triad Open Round & Sealed Round

Today i installed 20 of the Triad Open Round & Sealed Round speakers. These are their new speakers seen here. I installed a mix of open & sealed including 1 open & 1 sealed single stereo.

Installation went very fast. I had every area prepped and my tools & ladder ready to go. When they arrived i checked the packing slip and unboxed every pair and removed all packing. Once everything was unpacked i took the boxes out to the dumpster. I probably spent as much time unpacking as i did installing because the speakers were easy to install. Speaker terminals are “push” spring loaded. They are solid and lots of room for the 14 gauge speaker cable we have in the house. 3 screws with flip out tabs to hold them in place. They were a little bit of a pain because the ceilings all have 2 layers of 5/8″ drywall. The tabs give you just enough space to clear that so you have to make sure and dust out any small debris around the inside edge of your speaker cut out or they will miss it. With 1 layer of drywall this wouldn’t have been an issue at all. With 2 layers of drywall it was only an issue until the 2nd speaker when i realized i had to run my glove around the inside of the cut out to clear debris first. Speakers are nice looking (not that anyone will ever see them) and well made.

Magnetic grills are the shiz. I have installed thousands of speakers and let me tell you… the old style compression fit grills were a pain (especially sonance). I easily shaved 5 minutes per speaker because i didn’t have to screw around with the grill. 5 minutes might not sound like a lot but 20 speakers is 1 and 40 minutes saved.

The best part IMO is the new round only model. What i mean by that is that there is no rectangle or square version. They are all round. They have round and rectangle grills available for wall vs ceiling mounting. Each box only had 1 or the other. I think it would be cool if they included the round and the square in each box so you can decide which to use. This would make it easier for them and us to keep track of and stock.

The rectangle grill comes with these felt black corners. You have to put these on yourself. I assume they are not installed at the factory because paint would fill the grill holes wherever the felt exists. So basically leaving the felt off allows you to paint the grills (triad will paint grills at the factory FYI). These felt corners have to be installed or you will see the black/round speaker thru the grill. Leveling the in-wall grill is super easy because you can spin it around in a circle. You wont need your level until the end when you snap the grill in place.

Here are some iPhone4 pics i took of a pair i installed in a wall. This is the same wall seen in this remote central thread.